|Used Bitmain Antminer Z15 > 450+Ksol/s EQUIHASH 1510W 220V with PSU 220V (power supply) mining ZEC ZEN KMD ARRR HUSH ZEN, super efficiency with a top hashrate!
*Order without VAT (0%) with a EU company VAT number or by ordering from outside EU
*The price of mining machines must be adjusted frequently according to many factors, including cryptocurrency/USD exchange rate, the network difficulty, expected difficulty increase or changes in the algorithm.
*90 days warranty in Europe. - *Best price in the EU! - *Available in STOCK
Antminer Z15 Specifications:
Model No. 240-Z3
Reference power on wall, Watt
Reference power efficiency on wall @25°C, J/Ksol
Adapted AC/DC output requirement, Watt/ Volt
Hashrate & Power
Power efficiency on wall @25°C, J/KSol(1-1)
Power efficiency on wall @40°C, J/KSol(1-2)
Reference power on wall, Watt (1-3)
DC input voltage range, Volt (1-4)
DC input current range, Amp (1-5)
Adapted AC/DC output power requirement, Watt (1-6)
Quantity of hash chips
Quantity of hash boards
Networking connection mode
RJ45 ethernet 10/100M
Miner Size (Length*Width*Height, w/o package), mm (2-1) 245*132.5*290
Net weight, kg (2-2)
Noise, dBA @25°C (3-1)
Operation humidity, RH
(1-1) Refers PSU power conversion efficiency of 93%
(1-2) Refers PSU power conversion efficiency of 93%
(1-3) Min condition: 25°C, min J/KSol, typical hashrate
Max condition: 40°C, max J/KSol, max hashrate
Refers PSU power conversion efficiency of 93%
(1-4) Caution: Wrong input voltage may probably cause miner damaged
(1-5) Typ condition: min reference power, typical DC input voltage
Max condition: max reference power, min DC input voltage
(1-6) Min condition: 40°C, max J/KSol, max hashrate,
PSU output power should be no less than the min value to make sure mining stable.
Typical condition: (typical power) = (min power)/90%, leave power output margin for PSU.
Caution: It is strongly recommended that using typical power can make sure your miner can work well.
You can use one PSU to power multiple boards. Do not attempt to power one board with more than one PSU.
All PCI-E ports are required to plug in while powering up the board.
(2-1) domestic and international version
(2-2) domestic and international version
(3-1) Max condition: Fan is under max RPM(rotation per minute).
You will need an ATX PSU with sufficient 7 six-pin PCIE connectors. All PCIE connectors on a hashing board need to be connected to the PSU for the hashing board to operate. The APW7 power supply is included to power up the Antminer Z15.
The power cord is not included, please find one with at least 10A from your local market.
Exceptional Computational Power
The Antminer Z15 achieves a remarkable hashing performance of 420 KSol/s, 3X more power compared to its predecessor. Become a leader of the Equihash platform.
Immense Energy Savings
The new chip design and circuit configuration provides an impressive power efficiency of 3.6 J/KSol, saving up to 60%, providing more income to miners.
Enhanced Processing Power & Lightweight
Enhanced performance is attained effortlessly through the processing power of the TSMC 12nm chip. Even though the Antminer Z15 packs in three times more hashing power than the Antminer Z11, at 5.9 kg, it weighs only 0,5 kg more than its predecessor.
An Entirely New Design, Added Safety
A new generation design, effectively prevents dust and improves the stability and safety of the miner.