|New Bitmain Antminer APW7 PSU 1800W for Z15 S9i S9mini D3 V9 X3 E3 L3++
BITMAIN ANTMINER APW7 – 1800 WATT POWER SUPPLY
The APW7 Series AC-DC power supply is specifically designed with mining operations in mind, and combines high conversion efficiency and a strong dynamic performance into a power dense package. It also features short circuit, overload, overheat, low voltage and overload protections.
This Power supply includes several features which make it optimal for cryptocurrency mining operations, including:
1) The air flow direction runs from the AC input to the DC output, which is the same configuration as most miners. This proves beneficial for those with large-scale mining operations where heat management is a major consideration.
2) The PCB uses a conformal coating to prevent damage from high voltage spark discharges on MOS pins, or near high-pressure solder joints when external conductive particles or dust enter the PSU.
3) The APW7 can work stably in environments with a 50°C ambient temperature. If temperatures exceed 50°C, the PSU should be underclocked (refer to Max Load vs. Ambient Temperature Graph in the user guide for details). Considering the high temperature in mining operations, all internal components are selected with a standard of 105°C, so the APW7 has a much longer lifespan than a general use PSU under similar high temperatures.
4) One APW7 can power up one S9i, one L3++, one D3, one V9, one X3, one E3 or one Z9 mini. This APW7 has 5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors)
The high power efficiency translates to big cost savings — if one uses a secondhand general use PSU running at 83% efficiency, when compared to the APW7 running at 93.8% efficiency, assuming an electricity cost of $0.10 per kWh, a user could save more than $150 USD per year in power fees.
For bulk purchase please write to [email protected] for details.
The Power supply doesn’t include a powercord, please prepare one yourself.
The APW7 can deliver a maximum power of only 1000W if it is connected to a 110V mains power supply. To obtain the rated power of 1800W, the APW7 must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering
This batch of PSU comes with only 10 PCIe connectors so cannot be used with more than one Antminer.
Be sure to keep the original packing on hand when you get PSU, the original box should be used to return the PSU when you requesting RMA. Otherwise, it won’t be honored.
Note: Shipping costs: €20,- vat incl. per unit in EU zone and €30,- outside EU zone.
Output DC Voltage 12.0V
Rated Current(220V input) 150A
Rated Power (220V input) 1800W
Rated Current(110V input) 83.3A
Rated Power (110V input) 1000W
Ripple & Noise <1%
Voltage Accuracy 12.0-12.5V
Source Regulation <1%
Load Regulation <1%
Setup, Rise Time <2S
Power off Protection Trip Time >10mS
Input Voltage Range 100-264V AC
Frequency Range 47-63Hz
Power Factor >0.99(full load)
Leakage Current <1.5mA（220V 50Hz）
Protection Low-voltage Input 80-89V AC
Output Short Circuit Yes
Output Overcurrent 150-200A
Overheat Protection Yes
Environment Operating Temperature -20-60℃
Operating Humidity 20%-90%RH(non-‐condensing)
Altitude < 2000m
Structure Dimensions 206*110*62mm
Cooling Mode force-‐air cooling
*Order without VAT (0%) with a EU company VAT number or by ordering from outside EU
*The price of mining machines must be adjusted frequently according to many factors, including cryptocurrency/USD exchange rate, the network difficulty, expected difficulty increase or changes in the algorithm.
*180 days warranty in Europe. - *Best price in the EU! - *Available in STOCK